Decorative edge hemming: the purpose of the hemming is to decorate the transitional parts, enhance the effect of decoration, to show the great beauty of small beauty. Want to edge closure transition natural, we must remember that All closures as far as possible in the shaded corner, even if the closure in the plane, it is best not to close in the positive corner. In case you have to close in the sunny corner, you must also find a way to convert the sunny corner into a plane or sunny corner.
In the end, when it comes to edge closure, just pay attention to two aspects: design effect and cost control.
In the premise of ensuring that the purpose of the closure is achieved, it should be practically based on the design style of the building, the grade of decoration, the nature of the material, the form of the components and other characteristics of the closure way to have considered the choice, to achieve the effect of coordination with the surrounding materials and shape. In short, it is to choose the suitable form of edge closure according to the design style characteristics.
The complexity or otherwise of the design closure will directly affect the landing cost. Therefore, under the premise of ensuring the design effect, you should use a relatively more concise way of closure to reduce costs. Also, in the face of the closure, do not judge it as a good closure practice just because it looks good.
Common closure hemming methods
Decorative closure hemming can be divided into the following five types.By the continuity of the finished surface.
1, pressure strip
Belongs to the most practical and most commonly used way of closure, almost everywhere.
Construction is simple, low cost, and the effect is beautiful.
Widely used in the division of the wall and the ground, Yin and Yang corner closure, edge closure, modeling decoration and other scenes.
2、Leave a seam
Leave a gap between the material and the material to transition, functionally play a material buffer role, visually achieve beautiful and exquisite.
Applicable to the division of the decorative surface of a large area, the plane butt of two materials, space expansion joints processing, can increase the level of space.
Attention.
Leave seam closure process will increase the cost, construction if the gap size is not the same phenomenon, will affect the beauty.
Therefore, the size of the gap between the horizontal and vertical must be strictly controlled.
3、Staggered seam
The most clever and trouble-free way of closure.
In the same material or two materials to receive the opening, must not be received in the same plane - high and low difference type closure.
Applicable to.
Used when two materials are difficult to do flat due to certain factors.
4、Collision
Also called "dense seam", is a kind of closure without closure, directly hit the material together in the way of closure, the material flatness and construction requirements are very high.
Commonly used in the metal material of close seam processing, the integrity of large surface modeling requirements (large stone pattern, wood veneer pattern, metal engraving, etc.), as well as between the material and the material only need to normal articulation occasions.
5、Gluing
It is a kind of rescue type closure.
Almost can cover up all the defects in the closure (defects, reveal the grass-roots level, poor sealing, height differences, etc.), known as "closure magic", but for the pursuit of design effects of architectural decorative works, do not use.
The durability of glue is not high, easy to yellow, and not beautiful.
It is suitable for the case when both materials are hard or have caused defects that cannot be changed but need to be remedied, and the seam must be tight and consistent.
It can reduce the construction cost, and can play a buffer and protection role for the material.
About Us:
Certificate:
Packing&Shipping:
By sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.
