Products Description:
First, the practical use of the hemming strip.
1, the head of the door at the corner of the closing problem
This problem is a relatively classic closure "problem", prone to many detailed problems. Next, we through the "edge closure" thinking model provides three kinds of problem solving routines practical solution to the door head at the corner of the closure problem.
a、Solution 1: wrong seam
Put the high ceiling slightly lower, so that the relationship between the two suspended ceilings to form a staggered seam, which is the simplest and lowest cost solution.
b、Solution 2: pressure strip
Add a closing strip at the positive corner of the ceiling at the raised place, so that it is flush with the low ceiling. The closing strip can be an exposed stainless steel strip, or a corner guard strip covered by latex paint, or a door cover line.
c、Solution 3：Leave seam
Let the high and low ceiling use a gap (craft seam) to natural transition, so that this gap to disguise the shortage of this place, play a beautiful role, but also to achieve the purpose of the closure.
2、Metal waistline closure problem
Analysis of the problem: stainless steel and hemming relationship is not clear, resulting in the hemming strip does not cover the metal strip
a, solution 1: pressure strip
The pressure strip is the stainless steel strip directly embedded in the finishing material, so that they form a whole, but this method of finishing the straightness of the trim requirements.
b、Solution 2：Collision
Collision is to let the edge of the strip and stainless steel in the same plane, this method requires high precision on the edge of the strip.
c, solution 3: the wrong seam
Let the edge of the stainless steel strip off, this method is less difficult to construct, and low construction costs, but will make the finish convex, need to be confirmed by the design side.
3, the door cover line and skirting line closure problem
Analysis of the problem: the door cover line and skirting the wrong relationship between the closure
a. Solution 1: Collision
Skirting line lengthened or replaced with door piers, which is the most commonly used solution.
b, solution 2: special treatment
If in the area with water, you can add stone piers below the set line for closure.
c, solution 3: collision (cut corner)
In the case of the door pier unchanged, the set line 45 ° cut angle, so that the set line and the completed door pier collision, which is the most cost-saving solution.
Second, the design points of the closure problem.
1, the relationship between materials
At the intersection of materials, especially the yin and Yang corners and different materials of the closure, should be clear between the material who presses who, who receives who the logical relationship. Such as: stone and wood flooring metal crimp closure, wood veneer panels and stone collision closure, wood veneer and wallpaper plus inlay closure ......
2, the processing of construction details
In the different closure details structure focus on checking whether the seam alignment, whether the closure is bumping dense, there is no possible leakage of seams and other situations and construction control details, focus on checking the closure seam alignment and interface dense.
Targeted inspection of doors and windows threshold closure spacing and height discrepancy, tiles, walls, floors, skirting to seam situation, bathroom floor drain closure, ground and skirting and wall corner closure ......
3、Reflective materials of the environment
In the vicinity of mirrors, glass, high gloss finish materials, check whether there is a light source will reflect the grassroots situation of the closing. If there is, attention should be paid to masking the light, or furring the finish material to avoid the risk of leakage of light beads.
About Us:
Certificate:
Packing&Shipping：
By sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.
