Products Description:
In the decoration of daily life, edging is becoming more and more popular. The following are several ways to install edging：
Crimping - the almost ubiquitous method of closure
This is one of the most used methods in the whole decorative closure because of its simple construction, low cost and beautiful effect. So it is made into separating strip, crimping strip, sheathing line, corner protection line, decorative strip and other components, widely used in material division, yin and Yang corner closure, edge closure, modeling decoration and other scenes of edge closure.
Because of the special status of the pressure strip closure in the decorative design, resulting in the ability to choose the decorative strip has become an important skill for designers. Some people even say that the material closure without the transition of the decorative strip, always feel less sophisticated; but the use of a decorative strip closure that does not match the atmosphere of the space, it is better not to use. This shows the important role it plays in the edge closure.
Leave seam - the most reflective details of the closure
This treatment is to leave a gap between the material and the material to transition, that is, to play a functional material buffer role, but also to achieve a visually beautiful and exquisite; especially suitable for a large area of the decorative surface of the division, the plane of the two materials butt, the space of the expansion joint processing, as well as an effective means of increasing the sense of space levels.
Another point to note, leaving a seam will increase the construction cost, and if the construction filter control is not good, the gap size will also affect the beauty; therefore, when using the seam processing, the control of the gap size between the vertical and horizontal must be strict, especially in the field of vision can be seen.
Staggered seams - the smartest and most trouble-free way to close
The closure is not convex out, it should be concave, never do flat, otherwise the interface is quite troublesome, especially when there are modeling lines", this sentence is widely circulated in the construction site. As the words say, in the same material or two materials to receive the mouth, to receive the mouth without error, either A pressure B, or B pressure A, anyway, do not receive in a plane, so I call this way for the wrong seam, also called the high and low difference type of closure. It is suitable for: when two materials because of the design or construction factors, it is difficult to do flat, or do the usual difficult to ensure quality, it is particularly suitable for this method to solve, and is also the best use, the most trouble-free closure solution.
Collision: The way of closure without closure
This method is also called "dense seam", is a kind of closure method without closure, directly hitting the material together. This method is particularly demanding on the flatness of the material and the quality of construction, and if done well, the effect presented is absolutely perfect, but if done badly, a slight flaw will ruin the whole shape, the so-called details determine success or failure, which should be an accurate interpretation of this practice. This practice is often used in the metal material of close seam processing, the integrity of the large surface modeling requirements (for example: large stone pattern, wood veneer pattern, metal engraving, etc.) and between the material and the material only need normal articulation occasions.
Gluing: the journeyman's way of closure
Gluing can cover up almost all the defects in the decorative closure, so it is called "closure magic tool". When the above methods are used to close the mouth, there are defects, revealing the base, sealing is not tight, can only be remedied by gluing. For the pursuit of the design effect of the work, if you can not use the gluing technique, try not to use. Because the uncontrollable factors of gluing are too many, durability is not high, easy to yellow, extremely unattractive. After all, the glueing technique is only to cover up the defects of the closure, not to show the beauty of the details of the closure. When the texture of both materials are relatively hard (or has caused defects, can not be changed, and need to remedy), and requires the two seams must be tightly consistent, then only through the glue to the seam processing. This not only reduces the construction cost, but also can achieve the buffering and protection of the material, killing two birds with one stone.
About us:
Ningbo beautrim was founded in 2002, specializing in the production of ceramic tile decorative edging. We sell well in European and American countries with high-end quality, and thus achieve long-term cooperation with customers. Customers trust us, we trust customers, and promote each other to achieve win-win results. The company has a production and operation area of 10000 square meters, has many first-class equipment and many self-developed automatic production lines, and cooperates with large express logistics to achieve high-end quality and timely delivery.
Certificate:
Packing&Shipping:
By sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.
