Stainless Steel Transcarpet

Description

Now many home decoration, will choose ceramic tile + wood floor as the ground decoration material, so there is a problem: wood floor and ceramic tile joint treatment, how to connect ceramic tile and wood floor? The following summarizes several connection methods for wood floor and tile joint treatment.

Between the tile and the floor, you can use the buckle (door pressure strip) to close the mouth, including the flat and the height difference, there are corresponding buckle products, and the material and color of the buckle are more selective than stone. Generally, the buckle will choose a color similar to the floor, or directly use the embellishment color.

Floor buckles, also known as floor battens, are strip-shaped materials installed at the plane connection between the same or different materials. For example, between the floor and the floor, between the floor and the skirting, between the floor and the floor tile, between the floor and the doorstep, etc.

Classification and use of buckles:

1. Flat buckle. For the connection between the floor and the floor in the living room or doorway

Flat lamella: simple construction, high quality and low price

The flat batten is closed, mainly through the flat batten to cover the gap between the floor and the floor tile. In this way, the transition between the two materials is generally eased by a T-shaped edge bar. If there is a small height difference (within 5mm), a sloped bar can be used to connect, and it will not hinder walking.

Common materials for buckle strips are copper, wood, stainless steel, rubber strips, aluminum alloys, etc.

Second, the high and low deduction. It is suitable for the space with drop, the height buckle is similar to the flat strip, but the height buckle is suitable for the ground plan with a slight drop between the wooden floor and the floor tile, which can subtly alleviate the ground design with the height difference.

It is also possible to calculate the elevation of the finished surface of the two before laying the wooden floor and the floor tiles, connect the two flatly, install an extra keel under the flat interface, and then pour a 1-2mm angle on the floor where the floor meets the floor tiles. Then smooth with clear silicone.

Third, the side buckle. When the wooden floor is closed, no skirting line is needed, and the edge strip is used to cover the edge.

Fourth, the stair buckle. It is often used when paving steps or stairs with wooden floors, so that the stair facade and the plane are connected, non-slip and beautiful.

The buckle may seem inconspicuous, but it is very useful. Laying the floor is to leave gaps around the room, which is to allow the floor space to expand and contract. Install the clip to cover the gap between the floor and the door. Because the expansion rate of different materials is different, the buckle cover on the seam can provide a margin for this difference, prevent warping, and also play a role in closing the edge and beautifying the mouth.

Buckles are generally installed at the entrance, and the living room is also required to be installed with a length of more than 8 meters to avoid arching caused by thermal expansion and contraction of the floor. However, many consumers do not want to install buckles for the sake of beauty. The whole house does make the whole home look transparent and smooth, but compared with the conventional installation, its floor loss rate will increase, because the corners have to be cut. Moreover, for example, the platform or the edge of the stairs, you still need to use the buckle to finish the floor.

Our buckle is made of stainless steel and is used for the transition between carpet and tile.

ABOUT US

BEAUTRIM was founded in 2002 and spacialize in producing building decorative products.Since its inception oriented manufacturing PVC profiles for curtain track,decoration and furniture.Then introduced increasing the range of aluminum products year after year.

In therecently years,new materials such as stainless steel, brass were introduced into our production line,weadopted new technology to produce kinds of profiles and developed many different finishes for stainless steel & brass profiles,we are sure these new products would be more and more popular in the world near future.

Today BEAUTRIM products exported to many countries in Europe,North&South America,Africa etc,BEAUTRIM is distinguished from its competitors by marketing positioning,we are the most windest production line,and we always try to provide best quality-price products and professional service to our customers at the field of construction.

We thank the trust that customers and suppliers have placed in BEAUTRIM and its products year after year,we believe that we must have a bright future in the field construction.

CERTIFICATE

PACKING &SHIPPING

by sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.

FAQ 

Q1:Are you a factory or a trading company?

A:Factory.

Q2:Where is your factory?

A:Ningbo, Zhejiang,China.

Q3:Are custom services available?

A:Yes.

Q4:Do you support OEM and ODM?

A:Yes.

Q5:Why choose us?

A:Our company has a professional R & D and design team,and we have rich experience in product production,Leading position in the industry.

Q6:Does your packaging ensure product safety?

A:We ship the profiles on pallets, which is very safe.

Q7:What information do I need to provide to get an accurate quote?

A:Material, thickness,weight for pcs finish & quantity etc.

Q8:How can I get product progress without going to your company?

A:Provide photos and videos in the production workshop.

Q9:How is your after-sales service?

A:According to the requirements of customers, try to meet them within the scope that can be achieved.

Q10:Can samples be ordered?

A:yes,can.

Q11:How much is the sample fee, can it be refunded after bulk product?

A:free samples.

Q12:Do you provide quality assurance?

A:yes.