Stainless Steel Square Niche

Description

Whether in the home or in a public setting, alcoves are the finishing touch in interior wall design. Some lighting can also be done above the alcove to bring out the full brilliance of the furniture.

Through various forms of picture frames, the ethereal beauty of the cave is brought out, presenting a cultural trend.

Stainless steel niches are available in a variety of colors and finishes, including: champagne gold, rose gold, black titanium, bronze, brushed, mirror, sandblasted, and more. It can be matched with different furniture styles to adapt to different decoration styles.

And stainless steel niches not only occupy the total building area, but also provide decorative design for the interior space.

How to design stainless steel niches?

Program:

1. The standard wall thickness is more than 30cm, and some walls are only 27cm thick, which is also possible. The recommended niche depth is 15-20 cm. If the thickness is shallow, the niche is moot. If it is too deep, the item will not be aesthetically pleasing.

2. Considering the size of the niche and the proportions of the wall of the shower room, the proportions are harmonious. Generally speaking, the most suitable place is the cleansing face on the left or right, but this cannot be designed in a large size. A niche is set above the washbasin, so the specific specification of the slot must exceed 5-10CM, so as not to affect the work of the bricklayer. The actual size of the niche must refer to the floor tiles you choose. The specific specification should be a positive enlargement of the tile size and should not primarily show homodyne.

3.45 degree collision angle design, the shower room is embedded in the niche. Try to choose four frames as the 45-degree interfacial tension design scheme. The decorative design edge of the yin and yang corners cannot be used to express the highest practical effect of the niche.

The design effect of the above three stainless steel niches

1) The whole wall protrudes against the wall and is embedded in the niche of the stainless steel plate.

2) The floor tiles are brightly capped, partially recessed, and embedded with stainless steel niches.

3) Design method 1 for the construction conditions of the floor tile access entrance of the stainless steel plate niche using the pipeline in the narrow indoor space. Niche wall thickness: the wall thickness is more than 30cm, and some wall thicknesses are only 27cm, which is also possible. The recommended niche depth is 15-20 cm. If thin and shallow, the niche is moot. If it is too deep, the item will not be aesthetically pleasing.

Stainless steel niche installation process: according to the drawing size identification specification, open or build wall holes.

1. Total Niche Area - Niches account for a small percentage of the total area. It is enough to pick 10-20cm from the corner. The size is only the total width of a water pipe, and there is no special regulation on the relative height, which can be customized at will. The general road spacing is 1m, which is easy to use, light and clean. 2. Smooth the bottom of the wall hole to ensure the stable installation of the niche. If there is a forward extension, the outer frame will encounter a gap. According to the situation, smooth the bottom to ensure that the outer frame is close to the wall.

3. Apply structural adhesive and aesthetic seam adhesive to the back of the outer frame. Not only does superglue have the potential to stick to the alcove, regular adhesives must also be mold and moisture resistant. For example, they must withst and heat in high-temperature natural environments.

4. The stainless steel plate niche is installed in the wall hole to ensure that there is no gap.

The niche has the effect of expanding the interior space design, because the niche recessed into the wall widens the visual effect of people.

The actual effect of alcove-mounted lights is very obvious. We can see all the valuables displayed in niches in the jewelry store.

However, it is not allowed to make holes in the walls of the houses where everyone lives. Those who like niche designs can also deal with them in other ways.

niches can be made according to the home design. At this time, you can first design the furniture into a large shell, then design many holes on the vertical plane, put the TV and stereo in the larger holes, and install lamps in some small holes for placing artworks.

ABOUT US

BEAUTRIM was founded in 2002 and spacialize in producing building decorative products.Since its inception oriented manufacturing PVC profiles for curtain track,decoration and furniture.Then introduced increasing the range of aluminum products year after year.

In therecently years,new materials such as stainless steel, brass were introduced into our production line,weadopted new technology to produce kinds of profiles and developed many different finishes for stainless steel & brass profiles,we are sure these new products would be more and more popular in the world near future.

Today BEAUTRIM products exported to many countries in Europe,North&South America,Africa etc,BEAUTRIM is distinguished from its competitors by marketing positioning,we are the most windest production line,and we always try to provide best quality-price products and professional service to our customers at the field of construction.

We thank the trust that customers and suppliers have placed in BEAUTRIM and its products year after year,we believe that we must have a bright future in the field construction.

CERTIFICATE

PACKING &SHIPPING

by sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.

FAQ 

Q1:Are you a factory or a trading company?

A:Factory.

Q2:Where is your factory?

A:Ningbo, Zhejiang,China.

Q3:Are custom services available?

A:Yes.

Q4:Do you support OEM and ODM?

A:Yes.

Q5:Why choose us?

A:Our company has a professional R & D and design team,and we have rich experience in product production,Leading position in the industry.

Q6:Does your packaging ensure product safety?

A:We ship the profiles on pallets, which is very safe.

Q7:What information do I need to provide to get an accurate quote?

A:Material, thickness,weight for pcs finish & quantity etc.

Q8:How can I get product progress without going to your company?

A:Provide photos and videos in the production workshop.

Q9:How is your after-sales service?

A:According to the requirements of customers, try to meet them within the scope that can be achieved.

Q10:Can samples be ordered?

A:yes,can.

Q11:How much is the sample fee, can it be refunded after bulk product?

A:free samples.

Q12:Do you provide quality assurance?

A:yes.