Aluminum Alloy Skirting Board

Description

Aluminum skirting board is a relatively new decorative material, which has the characteristics of good decoration, high strength, flexibility, simplicity and fashion. It is the most popular decorative material at present. Many people do not understand aluminum skirting boards. The following is a detailed introduction to the installation method and precautions of the aluminum skirting board.

Introduction of installation method of aluminum alloy bottom plate:

1. Basic treatment

Before installing the aluminum skirting, pay attention to the basic treatment, observe whether the ground and wall are flat, if there is any unevenness, clean it with a spatula, and then install the skirting. Otherwise, the installed baseboard will be unevenly bent, not attached to the wall, and there will be unsightly gaps. Be sure to do the basic treatment.

2. Drill holes accurately.

Saw a 15cm long aluminum baseboard, snap the clip into the back slot, lean against the wall and mark the hole for the clip, then use a special tool to drill a hole in the wall, use a plastic nail to drive it into the hole you just punched Good hole. Note that the clips are fastened to the wall with screws.

3. Yin and Yang angle treatment

It is very troublesome to handle the position of the aluminum substrate at the yin and yang corners. The protruding corners of the wall are called external corners, and the concave corners are called negative corners. Pay attention when installing skirting at the yin and yang corners. Draw the position of the fixing point on the wall, then drill the plastic nails, and then use the screws to fix the yin and yang corners to the corners of the wall.

4. Device

Finally, measure the size distance of each section with a tape measure, cut out the corresponding size with a cutting machine, and clamp it on the corresponding buckle. The length of each aluminum base plate is 3m. When the length of the skirting board is exceeded, a fastener should be installed in the middle of the interface to ensure the flatness of the skirting board.

Introduction to the precautions for the installation of aluminum skirtings:

Control the connection gap

When installing aluminum skirting, attention should be paid to control the gap between the skirting and the floor. Under normal circumstances, the maximum gap between the skirting line and the floor should not exceed 3mm. Can be plugged with a 1 yuan coin. If more than two coins can be inserted, the gap is too large and needs to be reprocessed.

Handling details

The installation details of the aluminum skirting must not be ignored. Before installation, the white cement wall should be shoveled clean, and then the baseboard should be laid. After paving, protective measures must be taken to prevent the paint from sticking to the surface of the skirting due to brushing or spraying, and it should be cleaned up in time.

The aluminum alloy skirting line has the same function as the skirting line of other materials. It is to balance the vision of the home and to protect the wall from damage to a certain extent. Therefore, when using aluminum alloy skirting boards, we must pay more attention to the above problems, so as not to affect the overall home improvement effect.

ABOUT US

BEAUTRIM was founded in 2002 and spacialize in producing building decorative products.Since its inception oriented manufacturing PVC profiles for curtain track,decoration and furniture.Then introduced increasing the range of aluminum products year after year.

In therecently years,new materials such as stainless steel, brass were introduced into our production line,weadopted new technology to produce kinds of profiles and developed many different finishes for stainless steel & brass profiles,we are sure these new products would be more and more popular in the world near future.

Today BEAUTRIM products exported to many countries in Europe,North&South America,Africa etc,BEAUTRIM is distinguished from its competitors by marketing positioning,we are the most windest production line,and we always try to provide best quality-price products and professional service to our customers at the field of construction.

We thank the trust that customers and suppliers have placed in BEAUTRIM and its products year after year,we believe that we must have a bright future in the field construction.

CERTIFICATE

PACKING &SHIPPING

by sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.

FAQ 

Q1:Are you a factory or a trading company?

A:Factory.

Q2:Where is your factory?

A:Ningbo, Zhejiang,China.

Q3:Are custom services available?

A:Yes.

Q4:Do you support OEM and ODM?

A:Yes.

Q5:Why choose us?

A:Our company has a professional R & D and design team,and we have rich experience in product production,Leading position in the industry.

Q6:Does your packaging ensure product safety?

A:We ship the profiles on pallets, which is very safe.

Q7:What information do I need to provide to get an accurate quote?

A:Material, thickness,weight for pcs finish & quantity etc.

Q8:How can I get product progress without going to your company?

A:Provide photos and videos in the production workshop.

Q9:How is your after-sales service?

A:According to the requirements of customers, try to meet them within the scope that can be achieved.

Q10:Can samples be ordered?

A:yes,can.

Q11:How much is the sample fee, can it be refunded after bulk product?

A:free samples.

Q12:Do you provide quality assurance?

A:yes.