Multi Angle Measuring Ruler

Description

No matter what kind of decoration style, home decoration must use tiles as building materials. When choosing tiles according to your budget, you should also learn how to calculate the amount of tiles. The following is a detailed introduction for you.

There are many types of tiles on the market, and the prices vary widely. I often choose tiles that cost a dozen bucks. By the end of the whole house, the total price of tiles will vary by thousands or tens of thousands of yuan. This is because the number of tiles is not considered. Therefore, teach you how to calculate the amount of tiles. The method is simple. It only takes three steps to ensure that everyone can learn.

Step 1: Calculate the area to be tiled.

The principle of the method of calculating the amount of tiles is: first calculate the area of ​​tiles to be laid, then divide by the size of each tile, and finally get the number of tiles required. To determine the paving area, first determine where to pave, and then measure the plane area of ​​the place with a ruler.

Generally speaking, it is more common to lay tiles on the ground and walls, and the ceiling or ceiling is installed on the top of the house, so basically no tiles are used. The floor of the living room, dining room and bedroom can be tiled or wooden floor, but the floor of balcony, bathroom and kitchen must be tiled. If the ground is an ordinary rectangle or square, multiply the measured length and width; if it is an irregular shape, you need to calculate the overall area first, and then calculate the excess area, so that you can reduce and make up more.

Similar to the ground, tiles, paints or wallpapers can be selected for the living room, dining room, and bedroom walls, while tiles must be used for the balcony, bathroom, and kitchen walls. It should be noted that because the ceiling is installed, the bathroom and kitchen do not need to be covered with tiles. If the floor is 2.8m high, then the wall tiles only need to be laid to a height of 2.6m. Then measure the length of each wall separately.

Step 2: Select the size of the tiles to determine the area to be paved, and then we can choose the size of the tiles. Ceramic tiles can be divided into external wall tiles, internal wall tiles and floor tiles according to their uses. The three tiles are not exactly the same size. Since exterior wall tiles are rarely used, we only discuss interior wall and floor tiles this time.

The general sizes of floor tiles are 30*30cm, 30*60cm, 33*33cm, 40*40cm, 60*60cm, 80*80cm, 1*1m, 1.2*1.2m, etc. For larger spaces such as living room and dining room, 80*80cm or larger tiles can be more upscale. Bedroom, kitchen, bathroom, balcony, 60*60cm or smaller tiles are more suitable. The general dimensions of the wall are 10*10cm, 10*20cm, 20*30cm, 25*40cm, 30*45cm, 30*60cm, 40*80cm, etc.

The size is much smaller than that of floor tiles, mainly rectangular. Whether it is a wall tile or a floor tile, choose the size according to your budget (the larger the tile size, the more expensive it is) and the area of ​​the room. After choosing the floor and wall tiles, don't forget to count the number of skirting boards and waist pieces. Compared with floor tiles, the calculation of skirting and waist pieces is much simpler. Divide the length of the wall directly by the length of the skirting line or waist piece to get the number of skirting lines and waist pieces required.

Step 3: Choose how to lay the tiles. The increasing number of decorative styles has led to a variety of tile laying methods. Consumers can choose the most suitable paving method to obtain satisfactory results and show their individuality.

Below we choose three most representative paving methods to illustrate the calculation method of the amount of tiles.

The first method is to lay horizontally and vertically parallel to the wall.

The brick seams are aligned, leaving no seams. At the same time, use a grout close to the color of the brick for jointing. This way of paving looks fresh and tidy, and the rectangular tiles can be placed horizontally or vertically, which can make the whole space look spacious. The amount of tiles used this way is the easiest to calculate. Just divide the area by the size of each tile, then take an integer and add a tile or two as loss.

The second is diamond paving.

Some people who like individuality like diamond-shaped paving, which can make the wall and ground look more distinctive and see more different lines. In fact, it is not difficult to calculate the amount of tile laying. Also divide the area by the size of each brick and then round it up. The difference is that this kind of paving method has high requirements on the decoration master, and the loss of tiles will be relatively high, and the loss rate will reach 15%.

The third is the combined paving method.

Tiles of different sizes, styles and colors can be paved in a certain combination, showing different effects on the ground, avoiding a single color and uniform paving method. In key areas, such as reception areas, TV background walls, etc., you can use wavy lines to embellish the edges, or even decorative paintings. This method of laying is the most difficult to calculate. It is necessary to calculate the amount of tiles in each area step by step, then add 10%-15% of the loss, and finally add the amount of each tile together.

Summary: The calculation method of tile consumption is divided into three steps. The first step is to determine where to use the tiles, and calculate the area to be tiled (the ground is directly long and wide, minus the compensation; the wall length is multiplied by the floor height minus the ceiling height); the second step is to determine each need The size of the tiles used in the place where the tiles are laid; the third step is to select the calculation formula according to the area, the size of the tiles, and the paving method (different paving methods have different losses). A clear calculation of the amount of tiles required for a renovation helps us to easily select the most suitable tile products according to our budget.

Our Multi Angle Measuring Ruler can help you accurately measure the area of ​​the ground, It is Used for special positioning shaped tiles, can be used to mark the position of faucets, etc., and to facilitate the fitter to cut.

ABOUT US

BEAUTRIM was founded in 2002 and spacialize in producing building decorative products.Since its inception oriented manufacturing PVC profiles for curtain track,decoration and furniture.Then introduced increasing the range of aluminum products year after year.

In therecently years,new materials such as stainless steel, brass were introduced into our production line,weadopted new technology to produce kinds of profiles and developed many different finishes for stainless steel & brass profiles,we are sure these new products would be more and more popular in the world near future.

Today BEAUTRIM products exported to many countries in Europe,North&South America,Africa etc,BEAUTRIM is distinguished from its competitors by marketing positioning,we are the most windest production line,and we always try to provide best quality-price products and professional service to our customers at the field of construction.

We thank the trust that customers and suppliers have placed in BEAUTRIM and its products year after year,we believe that we must have a bright future in the field construction.

CERTIFICATE

PACKING &SHIPPING

by sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.

FAQ 

Q1:Are you a factory or a trading company?

A:Factory.

Q2:Where is your factory?

A:Ningbo, Zhejiang,China.

Q3:Are custom services available?

A:Yes.

Q4:Do you support OEM and ODM?

A:Yes.

Q5:Why choose us?

A:Our company has a professional R & D and design team,and we have rich experience in product production,Leading position in the industry.

Q6:Does your packaging ensure product safety?

A:We ship the profiles on pallets, which is very safe.

Q7:What information do I need to provide to get an accurate quote?

A:Material, thickness,weight for pcs finish & quantity etc.

Q8:How can I get product progress without going to your company?

A:Provide photos and videos in the production workshop.

Q9:How is your after-sales service?

A:According to the requirements of customers, try to meet them within the scope that can be achieved.

Q10:Can samples be ordered?

A:yes,can.

Q11:How much is the sample fee, can it be refunded after bulk product?

A:free samples.

Q12:Do you provide quality assurance?

A:yes.