Spaces

Description

1. What is a positioning artifact

The positioning artifact is a white cross. There are also many people who call the tile locator a clip. This small locator is used to fix the wall tiles. The master said that there are differences in our handwork, and this small locator can be used. In the center of the tile, the tile locator is generally white, with good toughness, good tensile force, non-toxic, impact resistance, moisture resistance, chemical resistance, placed in the middle of the tile, adjust the gap size, and make the tiles more beautiful and more beautiful. smooth. It will also be badly damaged by the weather, and this locator can prevent the wall tiles from falling due to just construction.

The role of positioning artifacts

1. Flexible use

The tile positioner can be adjusted up and down at will, which can repair the displacement and sagging of the tiles when they are over-pasted. The master said that the times are changing, and the construction tools in the decoration are constantly being updated, which can ensure the construction quality. In the past, it was too inconvenient to use wooden strips and pipes, but it was more convenient to use the locator.

2. Paving is better

After the support and positioning of the locator, the wall tiles can also be laid more beautifully, and the tile seams of the same size and width can be left. When we use the locator, we can reserve a gap of the width of a piece of paper between the wall tiles and the wall tiles at the same time, which can prevent the wall tiles from being stretched due to shrinkage and shrinkage when the cement dries and solidifies, and avoids artificial uncontrollability. factor.

3. Prevent thermal expansion and contraction of tiles

The decoration season is different, so we have different manual differences. I believe everyone knows the principle of thermal expansion and contraction. Our decoration in different seasons will be affected by temperature and humidity. The locator can avoid these problems during the construction process. Because ceramic tiles and cement mortar will have a certain expansion and contraction, if there is no gap, it will cause the tiles to bulge or crack in the later stage.

4. Prevent errors in tiles

Although ceramic tiles are now mechanized production, there will be a certain size error in the production process, because nothing is absolute, even machines will have defects, and some people are buying ceramic tiles for cheap, and they will buy some Slightly flawed tiles, if such tiles are laid without using the locator to leave seams, the joints of the tiles are prone to unevenness, which affects the appearance.

5. Paving is more perfect

For water and electricity, mud wood, paint, etc., you need to find a master, especially for tile paving, which requires more experienced veterans. It is a construction project that requires a very high degree of proficiency. However, even if the master is in the whole process of paving, it is impossible to completely achieve no errors when paving tiles. The tiles paved in different situations such as day and night will have different effects, such as no seams. , it is difficult to ensure the straightness of the joints of the tiles, which affects the aesthetics of the tiles.

Precautions for laying tiles

1. Now many small cities still use cement and sand to lay tiles. In fact, it is more popular to use tile glue now, because the adhesive force of tile glue is strong, the coating is generally 2-3 mm thinner than cement, the construction is simple, and it is more environmentally friendly.

2. It is best to lay the wall tiles first. Many people are entangled in whether to lay the wall tiles or the floor tiles first. In fact, the master only needs to have the skills in place, how to maintain the floor tiles and precautions. If we lay the floor tiles first, we must do a good job of maintenance, that is, the paved floor tiles cannot be stepped on. If the air is not dry, then the air will be uneven. It would also lead to construction delays, as workers could not start laying bricks right away.

And if we lay the floor tiles first, cement and sand will fall on the floor tiles when laying the wall tiles. The hardness of the sand is not low, and it is easy to scratch the surface of the floor tiles when you step on it, and it is not easy to make a bathroom. In addition, if the floor tiles are made first, the floor drain will be opened, and the cement mortar will easily flow into the floor drain, which will cause trouble to block the pipeline. So in general, it is better to lay bricks first. The locator is very good for tile paving. Our paving seasons are different, and there are many uncontrollable factors. This locator is inexpensive, compact and convenient, which is very suitable for our use. If your home is being renovated You can let the master use it, I believe the master will love it!

ABOUT US

BEAUTRIM was founded in 2002 and spacialize in producing building decorative products.Since its inception oriented manufacturing PVC profiles for curtain track,decoration and furniture.Then introduced increasing the range of aluminum products year after year.

In therecently years,new materials such as stainless steel, brass were introduced into our production line,weadopted new technology to produce kinds of profiles and developed many different finishes for stainless steel & brass profiles,we are sure these new products would be more and more popular in the world near future.

Today BEAUTRIM products exported to many countries in Europe,North&South America,Africa etc,BEAUTRIM is distinguished from its competitors by marketing positioning,we are the most windest production line,and we always try to provide best quality-price products and professional service to our customers at the field of construction.

We thank the trust that customers and suppliers have placed in BEAUTRIM and its products year after year,we believe that we must have a bright future in the field construction.

CERTIFICATE

PACKING &SHIPPING

by sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.

FAQ 

Q1:Are you a factory or a trading company?

A:Factory.

Q2:Where is your factory?

A:Ningbo, Zhejiang,China.

Q3:Are custom services available?

A:Yes.

Q4:Do you support OEM and ODM?

A:Yes.

Q5:Why choose us?

A:Our company has a professional R & D and design team,and we have rich experience in product production,Leading position in the industry.

Q6:Does your packaging ensure product safety?

A:We ship the profiles on pallets, which is very safe.

Q7:What information do I need to provide to get an accurate quote?

A:Material, thickness,weight for pcs finish & quantity etc.

Q8:How can I get product progress without going to your company?

A:Provide photos and videos in the production workshop.

Q9:How is your after-sales service?

A:According to the requirements of customers, try to meet them within the scope that can be achieved.

Q10:Can samples be ordered?

A:yes,can.

Q11:How much is the sample fee, can it be refunded after bulk product?

A:free samples.

Q12:Do you provide quality assurance?

A:yes.