Aluminum Alloy Anti-Slip

Description

After the wall tiles are laid, many families will choose the way of wrapping the corners. This approach can not only effectively prevent the corners from being bumped, affecting the appearance of the wall, but also enhance the safety of our use, and also prevent the sharp edges of the outer corners from hurting the elderly and children. Is it necessary to grind the corners? What are the corner wrapping methods? Let's take this question and find out if it is necessary to have corners together!

Is it necessary to grind the corners?

Some users think that wrapping the corners is unnecessary, which will not only increase the decoration cost, but also has little practical significance; some users think that it is necessary to trim the corners to avoid damage to the tiles at the outer corners, thereby affecting the beauty of the wall and the service life of the tiles. . In general, the corners are good, but it does not mean that they must be done. We can weigh the pros and cons according to the actual situation and decide whether to remove the corners.

Tile edging treatment method

The treatment method is roughly as follows: First, after the tile construction is generally completed, we invert the inner corner of the brick by 45 degrees, so that the two bricks form 90 degrees. Then we add edge strips, which can be pvc or aluminum alloy. Generally speaking, outside corners can be divided into two treatment methods: edging and wrapping. If the edge is polished, it will be beautiful and can hide the traces left by the tile soaking in water. If the edge is wrapped, it is cheap and the use loss of the tile is small.

For aluminum alloy moldings, there is a good sense of strength and style. Aluminum alloy decorative line is widely used in decoration, such as aluminum alloy tile edging, closing line, etc.

As the most mainstream wire at present, aluminum alloy wire is durable, environmentally friendly, non-toxic and formaldehyde-free, and can be directly installed and used. They have high and low temperature resistance, high hardness, beautiful decoration, and straight lines, making the decorative corners more three-dimensional.

The aluminum alloy tile edging and closing line is easy to install, saves time and effort, and saves materials. It does not require additional edging and trimming processes, and only needs to be neatly spliced ​​with the tiles.

Analysis on the Causes of Unwrapped Broken Tile in the Corner

Many families choose suitable glazed tiles when building walls. Although this kind of tile has good decorative properties, it is not very dense and delicate, and it is afraid of touching. So go to the edge after the wall tiles are pasted. If there is no edging and there is no cement protection on the outside, it is easy to be frequently touched during use, causing damage.

Precautions for wrapping corners

This is a meticulous work, and it is recommended that you do not take it lightly. After the foundation construction is completed, it is best to use floor tiles as chamfered tiles on the wall, so that the density of the tiles is very high, and the chamfering is not afraid of collision after the completion of the chamfering. Or we can use glazed tiles on the plane, and tiles with similar colors for the outer corners, and pour the 45-degree angle on the wall, so that the construction can also be done without edge strips. It's beautiful, and you don't have to worry about bumping it.

ABOUT US

BEAUTRIM was founded in 2002 and spacialize in producing building decorative products.Since its inception oriented manufacturing PVC profiles for curtain track,decoration and furniture.Then introduced increasing the range of aluminum products year after year.

In therecently years,new materials such as stainless steel, brass were introduced into our production line,weadopted new technology to produce kinds of profiles and developed many different finishes for stainless steel & brass profiles,we are sure these new products would be more and more popular in the world near future.

Today BEAUTRIM products exported to many countries in Europe,North&South America,Africa etc,BEAUTRIM is distinguished from its competitors by marketing positioning,we are the most windest production line,and we always try to provide best quality-price products and professional service to our customers at the field of construction.

We thank the trust that customers and suppliers have placed in BEAUTRIM and its products year after year,we believe that we must have a bright future in the field construction.

CERTIFICATE

PACKING &SHIPPING

by sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.

FAQ 

Q1:Are you a factory or a trading company?

A:Factory.

Q2:Where is your factory?

A:Ningbo, Zhejiang,China.

Q3:Are custom services available?

A:Yes.

Q4:Do you support OEM and ODM?

A:Yes.

Q5:Why choose us?

A:Our company has a professional R & D and design team,and we have rich experience in product production,Leading position in the industry.

Q6:Does your packaging ensure product safety?

A:We ship the profiles on pallets, which is very safe.

Q7:What information do I need to provide to get an accurate quote?

A:Material, thickness,weight for pcs finish & quantity etc.

Q8:How can I get product progress without going to your company?

A:Provide photos and videos in the production workshop.

Q9:How is your after-sales service?

A:According to the requirements of customers, try to meet them within the scope that can be achieved.

Q10:Can samples be ordered?

A:yes,can.

Q11:How much is the sample fee, can it be refunded after bulk product?

A:free samples.

Q12:Do you provide quality assurance?

A:yes.