Stair tread is an important factor that directly affects the safety of stairs, so it needs to be given due attention when installing the tread. In the installation must follow the specifications, first for the foundation treatment, then woodworking board bottoming, and finally in the installation. Also remember to install anti-slip strips, step lights or step carpet, so that we can use the stairs more safely and securely.
Stair tread installation method.
1、Foundation treatment
Just bought the house, the general living room inside will have done a good job of semi-finished cement concrete ten material stairs. Generally speaking, this staircase is already relatively strong, we do not need to worry about its safety, but a set of other wild with concrete ten stairs, or will give people a feeling of incompatibility. So we can make the stairs more beautiful and comfortable by installing tread plate wide style. The first step is the foundation treatment of the stairs. We can start with cement mortar for leveling. In the process of leveling also leave enough space to install the tread plate.
2、Carpentry board priming
According to the common construction method, cement stair treads can not be laid directly on the surface of the cement layer. We generally take the method is to use the woodworking board bottoming. Do not ignore this step, because this step is the most important. We generally use the core board as the material, according to the different shapes to cut, and finally use the nail gun to cut the core board to fix good. After the installation, we can lay the cement stair treads.
3、Installation of treads
After the first two steps are completed, the installation of cement stair treads becomes a very simple matter. We just need to find the location of the installation, and then use the nail gun to fix the cement stair treads can be. However, we should pay attention to the installation, we try to choose some places that are not conspicuous, so as not to affect the aesthetic level. Finally, we have to check whether there is a good wood thorn. If there is, sand it down a bit.
Stair tread anti-slip installation.
1, the stair plane and elevation should be 90 degrees, first clean the stair steps, the front edge of the stairs and stair tread anti-slip strip coated with universal adhesive on the back, and so slightly dry bonding with a rubber hammer to hammer the bond.
2, or punch a hole in the aluminum base, with screws to fix the stair tread anti-slip strips on the stair surface, and then finally insert the surface of the adhesive strip can be. Such as with a special corner metal buckle fixed corner ends, in order to prevent the stair tread anti-slip shrinkage and fall off at the same time also to achieve the effect of senior aesthetic.
About Us:
Certificate:
Packing&Shipping：
By sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.
