How to construct the tile hemming strip?
1. Confirm the uprightness and seams
Installed in the protruding corners of the edge strip, from the top to the bottom to check its angle, can determine whether the installation is skewed. Tile and edge strip fit; if the gap is too large, the master should be asked to remove and redo.
2. Determine whether there is a defective edge strip
Confirm whether the border strip in the construction process because of the collision caused by damage. Especially low-priced products, renovation may take advantage of the delivery of the house before the secretly to fill the soil, spray paint to cover the rupture; wait until the homeowner found, but also can only pay out of pocket to redo it.
How to maintain?
Just wipe it with water. The edge of the strip without special cleaning maintenance. But if there is dirty, PVC material edge strip, can withstand the cleaning agent and cleaning cloth brush; as for stainless steel and aluminum, wipe with cleaning agent, should immediately wipe clean with water. 2 updated with tiles knocked off usually up to a certain level of edge strip, life expectancy of at least two or three decades or more. If you want to replace the edge strip, you have to remove the entire row of tiles connected, at least four or five thousand dollars.
How to do the paintless board edge strip?
There are two practices: 1, with ready-made edging closure. Edge strip or buckle, with 309 and other fast adhesive bonding; 2, or with tools in the back of the board Sin out of the V-groove closure, the practice of sealing the end.
How to fix the floor hemming strip?
Usually are fixed using glass glue. The seam inside the dust to get clean, and then the glass glue into the seam as well as on the hemming strip, the hemming strip into the seam, with a heavy pressure for about 24 hours.
How to fix the carpet hemming strip?
Can use nails or ab glue to fix, but I suggest using ab glue is better, after all, nails on the floor damage is too big.
How to choose the edge of the flooring strips?
After the floor is laid and the wall, over the door stone and other surrounding areas, you need to leave a gap of 8-12 mm, to reserve space for the expansion of the floor, and through the installation of skirting, the gap to cover. Flooring and over the door stone, floor tiles and other connections of the gap, you need to use the pressure strip or hem strip installation to cover the gap.
Aluminum tile edging strip will discolor?
Will be the normal oxidation, can be rubbed brighter never mind.
Wave board to do the back wall how to close the edge is to use the edge of the strip to use the board to do the base what kind of edge strip?
In general. With wave board to do the back wall need to do the frame. Four boxes protrude. Wave plate embedded in the groove inside.
About Us:
Certificate:
Packing&Shipping:
By sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.
