Products Description:
This U-shaped strip with diamonds can be used for ceiling decoration, ceiling metal decorative lines as a whole space decorative tone, because of the rich variety of colors and easy construction and is widely used!
Ceiling metal decorative lines are divided into several kinds.
One kind is the metal pieces used as ceiling decorative pieces.
One kind is the metal line as ceiling closure: this kind of metal line often comes with LED light-emitting piece, which can create a very sharp and modern ceiling closure.
The third type is the T-shaped keel used as a ceiling installation, as its lower part is exposed under the ceiling, forming a strip of metal decorative strips.
Its main top decoration types
Walk a circle of metal decorative lines at the top of the gypsum edge, or walk 2~3 circles on the original top surface to highlight the layers and raise the height of the whole space
Or as a ceiling ceiling inline decoration, install track spotlights or bucket lights, is also very atmospheric
The common type of aluminum line is u-type slot, u-type slot wall decoration is used more. Moreover, t-type slot, several types of slot, curved slot, according to different locations and different shapes choose different specifications.
Installation method one.
1, play a good horizontal vertical line or modeling line.
2, lucite machine cutting by line, cutting as straight as possible.
3, after blowing or absorbing the dust, in the cut seam and the back of the line hit the appropriate amount of structural adhesive for installation (also can first set aside 2mm groove according to the modeling structure adhesive paste installation).
Installation method two.
1, play a good horizontal vertical line or modeling line.
2, according to the line in the wall punched a good hole, punched into the wood plug or glue plug, good wood (glue) plug location mark.
3, the base of the line with screws according to the location of the wood (glue) plug to install a good buckle on the panel.
Generally in the top surface to leave a groove and then use the glue to stick the metal lines, of course, the groove should be left just right so that there is a mutual force with the metal lines, too loose will not work. There is also the top surface than the metal lines left small wood lines, and finally the metal lines card up. General top of the metal lines are relatively thin projection height is not high.
Aluminum lines fixed method: play glass glue or neutral silicone adhesive. t-type slot for construction is more stringent, the construction surface needs to be dust-free, smooth, dry!
We are a professional production of edge banding factory, over the years the production of products sold around the world, quality delivery, etc. is guaranteed. We accept various colors and styles of customization, of course, provided that the quantity reaches a certain standard. We mainly do stainless steel, aluminum, PVC and other materials of trim, and also do stainless steel related products such as stainless steel floor drains, stainless steel niches, stainless steel shelves, etc. We look forward to your inquiry.
About Us:
Certificate:
Packing&Shipping:
By sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.