Stainless Steel U Shape

Description

In the process of decoration design, more and more designers and owners are pursuing the details of the design, such as the closing between the tiles. Let me share with you some transitional relationships between them. The following mainly solves the following problems for you:

What are the transitional relationships between tiles and tiles?And How to refine their closing arguments?

Tile-Tile Transition Relationship

Let's analyze it from four aspects! We often have transitional relationships in the direction of horizontal, yin, yang, and height difference.

Horizontal deflection

There are two types of lateral transitions: one on the ground and one on the wall.

Ground

On the ground of the transition relationship, there are two common tile transition modes, or there are different tile typeset transition modes.

The surface of the wall

In the transition relationship of the wall, there are also two different patterns of tile paving transition methods, or different tile layout transition methods. The only difference is the unique decorative transition method of the wall tile waistline.

The direction of the external angle

The transition relationship in the direction of the external angle can also be divided into two types:

Wall outside corner

The transition relationship of the positive angle on the wall is mostly the positive angle generated by the transition of the wall, and the transition method of tile chamfering is more commonly used;

foundation foot

Secondly, the ground has outer corners, such as platforms, steps, countertops, etc. , often used for chamfering or rounding.

Inside corner direction

The transition in the direction of the negative angle can also be divided into two types:

Wall Tiles and Wall Turning Points

One case is that ordinary wall tiles follow the turning point of the wall, resulting in the transition of inner corners;

Wall to floor

Another situation is the common transition method between the wall and the ground, between the wall tile and the floor tile.

Height difference direction

The transition in the direction of height difference can be divided into two cases:

Small drop

For small drop, we can generally use cement to find the slope, or we can use stainless steel folded profiles on the tiles to facilitate transition;

Big drop

For a larger drop, we put bricks directly on the side, or longer and larger, but not enough for a step. We generally use tiles to directly find slopes for processing.

Fine processing method

After clarifying the common transition methods between tiles, let's talk about the refined and closed processing of these transition methods.

1.The closing treatment of the transition section in the horizontal direction

We can change the original method, such as the transition from tiles to different patterns of tiles, or the transition of the waistline of tiles, into new metal materials, such as aluminum profiles, stainless steel or copper bars, to deal with the transition and closure between them.

2.Closure of the transition in the direction of the outer corner

There are two ways to handle traditional outside corner chamfers:

corner

Sand the edges of the tiles to a 45-degree angle, then splice them together. However, when the tiles are tightly spliced, there are often some cases of broken porcelain, especially the kitchen flue.

When cooking, a large amount of hot air is generated, which causes the tiles to expand and squeeze each other, resulting in the phenomenon of tile edge collapse.

There are a variety of outer corner strips on the market today. We might as well change it, and replace the original way of chamfering the outside corners of wall tiles with stainless steel profiles or metal closing strips to close the transition.

Not only beautiful, but also safer, greatly reducing the phenomenon of tile edge chipping and hurting tile sharp edges.

3.The closed treatment of the transition in the direction of the inner corner.

We often use finished stainless steel profiles to replace the original method of pressing the wall and closing the wall to deal with the inner corners of the wall and the ground. One of them is mainly to meet the convenience of our daily cleaning and sanitation and avoid dead corners.

Our Stainless Steel U Shape is used for the transition of waist line tiles.It is your best choice.

ABOUT US

BEAUTRIM was founded in 2002 and spacialize in producing building decorative products.Since its inception oriented manufacturing PVC profiles for curtain track,decoration and furniture.Then introduced increasing the range of aluminum products year after year.

In therecently years,new materials such as stainless steel, brass were introduced into our production line,weadopted new technology to produce kinds of profiles and developed many different finishes for stainless steel & brass profiles,we are sure these new products would be more and more popular in the world near future.

Today BEAUTRIM products exported to many countries in Europe,North&South America,Africa etc,BEAUTRIM is distinguished from its competitors by marketing positioning,we are the most windest production line,and we always try to provide best quality-price products and professional service to our customers at the field of construction.

We thank the trust that customers and suppliers have placed in BEAUTRIM and its products year after year,we believe that we must have a bright future in the field construction.

CERTIFICATE

PACKING &SHIPPING

by sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.

FAQ 

Q1:Are you a factory or a trading company?

A:Factory.

Q2:Where is your factory?

A:Ningbo, Zhejiang,China.

Q3:Are custom services available?

A:Yes.

Q4:Do you support OEM and ODM?

A:Yes.

Q5:Why choose us?

A:Our company has a professional R & D and design team,and we have rich experience in product production,Leading position in the industry.

Q6:Does your packaging ensure product safety?

A:We ship the profiles on pallets, which is very safe.

Q7:What information do I need to provide to get an accurate quote?

A:Material, thickness,weight for pcs finish & quantity etc.

Q8:How can I get product progress without going to your company?

A:Provide photos and videos in the production workshop.

Q9:How is your after-sales service?

A:According to the requirements of customers, try to meet them within the scope that can be achieved.

Q10:Can samples be ordered?

A:yes,can.

Q11:How much is the sample fee, can it be refunded after bulk product?

A:free samples.

Q12:Do you provide quality assurance?

A:yes.