Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
≥200/piece
USD 2.30
In order to protect the edges of stairs and the safety of people going up and down stairs, many people also choose to use Stair Nosing when decorating, however, many high-end occasions nowadays require not only higher loadbearing and safety requirements, but also higher decorative requirements.
Stair Nosing is a metal profile used to mount on the edge of stair treads to create a non-slip staircase. It is designed for better grip. Once installed, it also enhances the aesthetic appeal of the stair treads. The metal material gives a stronger and more durable feel. It can provide some isolation and also some protection. The same material, the difference in thickness, has a great impact on the price. The more difficult the installation, the greater the risk and the higher the cost. So before the installation, you must do a good job of planning the installation, but also have enough safety awareness, all aspects of the work should be done, so as to reduce a lot of problems. Nowadays, most of the stairs are component-based so that they can be installed at home. It is very easy to install, and only three or four workers are needed, and if the installation is fast, it only takes a few hours, and if the installation is slow, it can be completed in two or three days at most. If all the installation is completed, you can do it yourself. The advantage of this is that you can save on installation costs and installation time and move in faster. In this case, it will be much easier to repair later, and even if it can't be repaired, it can be dismantled, which is more advantageous to preserve the value. Construction is simple, design and construction are done in the factory, only measurement and installation is needed, very convenient, compared to traditional construction, can shorten the construction period and save costs.
Installation requires attention to.
First, the size should be strictly calculated before cutting the material. Cutting must make the cut and the line into 90 degrees, especially with the matching corner lap installation of the product, and to achieve a certain splicing angle, which can avoid the lap with the corner is not tight and affect the beauty. Second, for the use of cement paste installed products and the main material contact gap must be filled with cement paste, to ensure that the product long-term use and stepping does not appear loose phenomenon. Third, for the products installed with screws must be tightened all the screws, so as not to affect the installation and beauty of the anti-slip rubber strip. Fourth, it is used in the general area without the role of external forces, so its installation only needs to use glass glue can be fixed. Fifth, at the time of installation, be sure to check the model and the location of the installation, if not in line with the requirements, do not install. There are many materials that need to be used in the construction process of the building industry, and the effect produced by different materials in the process is different. Under different conditions, the damage to the substrate is also different, and we need to deal with it according to the actual.
Certificate:
Packing&Shipping
By sea & by air, 25-30 days deliver time, stick protective film for each pcs.including stick lable. 20 pcs/ctn, 40 pcs/ctn, 60 pcs/ctn and 100 pcs/ctn all can.